• 885 Cesar E Chavez Ave SW
    Grand Rapids, MI 49503
  • 800-442-9191

GATES MOLDED NOTCH TRI-POWER-AX

  • Item Code: AX52
  • Brand: Gates
  • Unit Size: 1

Description

Built for superior performance on heavy-duty classical cross-section drives. The raw edge, Ethylene Elastomer construction and special notch design makes the Tri-Power belt especially suited for small diameter pulleys and back-side idler drives.

Features

Back To Top
    • Belt edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear.
    • Flex-bonded cords are strongly forged to the belt body, resulting in equal load distribution and absorption of bending stress without cord deterioration.
    • 15% capacity increase over wrapped belts.
    • Notches molded into the belt during manufacturing increase flexibility, making this belt well suited for drives with smaller diameter sheaves.
    • Suitable for all industrial applications, particularly where small or sub-minimal sheave diameters are required.
    • Meets ARPM/RMA IP-3-2 oil and heat resistant standards and IP-3-3 static conductivity requirements.
    • REACH and RoHS 2 compliant.

Tech Specs

Back To Top
Angle 38 deg
Belt Back Side Smooth
Belt Inside Notched
Brand Gates
Color Black
Construction Bandless
Cord Material Polyester
Effective Length 52 in
Material Ethylene Elastomeric
Max Temp +250 deg F
Min Temp -60 deg F
Number of Ribs/Strands 1
Outside Circumference 54 in
Product Type Tri-Power® Belts - AX Section
Sided Single Sided
Static Conductive Yes
Thickness 0.35 in
Top Width 0.5 in