CR SMALL BORE SEAL

* The images shown are for illustration purposes only and may not be an exact representation of the product.

Description

Radial shaft seal with metal case, SKF Wave lip and auxiliary, contacting lip, for oil or grease

Features Tech Specs

Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion.
CRWA1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, a garter spring to optimize sealing against the shaft, and a dust lip to improve contamination exclusion.
Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
For oil or grease.
WAVE lip creates higher pumping rate.
WAVE lip has less friction between shaft and lip.
WAVE lip has a lower temperature at the contact point.

Auxiliary Lip	Yes
Brand	SKF
Design	CRWA1
Housing Bore Diameter	2.623 in
Max Temp	212 °F
Min Temp	-40 °F
Permissible Circumferential Speed	25.49 fps
Product Type	Radial Shaft Seals
Rotational Speed	3,000 rpm
Seal Width	0.313 in
Sealing Lip Material	Nitrile rubber (NBR)
Shaft Diameter	1.938 in
Type of Outside Diameter	Metal-cased with sealant coating on outside diameter
Weight	0.045 lb